cacalabs
/
libpipi
1
0
Разклонения 0
Код Задачи 0 Заявки за сливане 0 Версии 0 Уики Activity
Преглед на файлове

Wrote an Oric hires file writer, based on img2oric. 

git-svn-id: file:///srv/caca.zoy.org/var/lib/svn/libpipi/trunk@2845 92316355-f0b4-4df1-b90c-862c8a59935f
remotes/tiles
sam преди 16 години
родител
36438eed8f
ревизия
ab741dd245
променени са 2 файла, в които са добавени 440 реда и са изтрити 16 реда
Разделен изглед
Diff Options
Показване на статистика Download Patch File Download Diff File
  1. +3
    -3
      pipi/codec.c
  2. +437
    -13
      pipi/codec/oric.c

+ 3
- 3
pipi/codec.c Целия файл

@@ -77,6 +77,9 @@ int pipi_save(pipi_image_t *img, const char *name)
{
int ret = -1;

if(ret < 0)
ret = pipi_save_oric(img, name);

#if USE_IMLIB2
if(ret < 0)
ret = pipi_save_imlib2(img, name);
@@ -94,9 +97,6 @@ int pipi_save(pipi_image_t *img, const char *name)
ret = pipi_save_gdi(img, name);
#endif

if(!ret)
ret = pipi_save_oric(img, name);

return ret;
}


+ 437
- 13
pipi/codec/oric.c Целия файл

@@ -22,13 +22,22 @@
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>

#include "pipi.h"
#include "pipi_internals.h"

static int load_data(const char *name, uint8_t *screen);
/* Image dimensions and recursion depth. DEPTH = 2 is a reasonable value,
* DEPTH = 3 gives good quality, and higher values may improve the results
* even more but at the cost of significantly longer computation times. */
#define WIDTH 240
#define HEIGHT 200
#define DEPTH 2

pipi_image_t *pipi_load_oric(const char *name)
static int read_screen(char const *name, uint8_t *screen);
static void write_screen(float const *data, uint8_t *screen);

pipi_image_t *pipi_load_oric(char const *name)
{
static uint8_t const pal[32] =
{
@@ -42,20 +51,20 @@ pipi_image_t *pipi_load_oric(const char *name)
0xff, 0xff, 0xff, 0xff,
};

uint8_t screen[8000];
uint8_t screen[WIDTH * HEIGHT / 6];
pipi_image_t *img;
pipi_pixels_t *p;
uint8_t *data;
int x, y, i;

if(load_data(name, screen) < 0)
if(read_screen(name, screen) < 0)
return NULL;

img = pipi_new(240, 200);
img = pipi_new(WIDTH, HEIGHT);
p = pipi_getpixels(img, PIPI_PIXELS_RGBA_C);
data = p->pixels;

for(y = 0; y < 200; y++)
for(y = 0; y < HEIGHT; y++)
{
int bg = 0, fg = 7;

@@ -70,7 +79,8 @@ pipi_image_t *pipi_load_oric(const char *name)
{
col = (c & (1 << (5 - i))) ? (c & 0x80) ? 7 - fg : fg
: (c & 0x80) ? 7 - bg : bg;
memcpy(data + (y * 240 + x * 6 + i) * 4, pal + 4 * col, 4);
memcpy(data + (y * WIDTH + x * 6 + i) * 4,
pal + 4 * col, 4);
}
}
else if((c & 0x60) == 0x00)
@@ -83,7 +93,8 @@ pipi_image_t *pipi_load_oric(const char *name)
col = (c & 0x80) ? 7 - bg : bg;

for(i = 0; i < 6; i++)
memcpy(data + (y * 240 + x * 6 + i) * 4, pal + 4 * col, 4);
memcpy(data + (y * WIDTH + x * 6 + i) * 4,
pal + 4 * col, 4);
}
/* else: invalid sequence */
}
@@ -97,16 +108,54 @@ pipi_image_t *pipi_load_oric(const char *name)
return img;
}

int pipi_save_oric(pipi_image_t *img, const char *name)
int pipi_save_oric(pipi_image_t *img, char const *name)
{
return -1;
uint8_t screen[WIDTH * HEIGHT / 6];
pipi_image_t *tmp = NULL;
pipi_pixels_t *p;
float *data;
FILE *fp;
size_t len;

len = strlen(name);
if(len < 4 || name[len - 4] != '.'
|| toupper(name[len - 3]) != 'T'
|| toupper(name[len - 2]) != 'A'
|| toupper(name[len - 1]) != 'P')
return -1;

fp = fopen(name, "w");
if(!fp)
return -1;

fwrite("\x16\x16\x16\x16\x24", 1, 5, fp);
fwrite("\x00\xff\x80\x00\xbf\x3f\xa0\x00\x00", 1, 9, fp);
fwrite(name, 1, len - 4, fp);
fwrite("\x00", 1, 1, fp);

if(img->w != WIDTH || img->h != HEIGHT)
{
tmp = pipi_resize(img, WIDTH, HEIGHT);
p = pipi_getpixels(tmp, PIPI_PIXELS_RGBA_F);
}
else
p = pipi_getpixels(img, PIPI_PIXELS_RGBA_F);
data = p->pixels;
write_screen(data, screen);
if(tmp)
pipi_free(tmp);

fwrite(screen, 1, WIDTH * HEIGHT / 6, fp);
fclose(fp);

return 0;
}

/*
* XXX: The following functions are local.
*/

static int load_data(const char *name, uint8_t *screen)
static int read_screen(char const *name, uint8_t *screen)
{
FILE *fp;
int ch;
@@ -130,7 +179,7 @@ static int load_data(const char *name, uint8_t *screen)
|| fgetc(fp) != 0xa0 || fgetc(fp) != 0x00 || fgetc(fp) != 0x00)
goto syntax_error;

/* Skip the file name */
/* Skip the file name, including trailing nul char */
for(;;)
{
ch = fgetc(fp);
@@ -141,7 +190,7 @@ static int load_data(const char *name, uint8_t *screen)
}

/* Read screen data */
if(fread(screen, 1, 8000, fp) != 8000)
if(fread(screen, 1, WIDTH * HEIGHT / 6, fp) != WIDTH * HEIGHT / 6)
goto syntax_error;

fclose(fp);
@@ -152,3 +201,378 @@ syntax_error:
return -1;
}

/* Error diffusion table, similar to Floyd-Steinberg. I choose not to
* propagate 100% of the error, because doing so creates awful artifacts
* (full lines of the same colour, massive colour bleeding) for unclear
* reasons. Atkinson dithering propagates 3/4 of the error, which is even
* less than our 31/32. I also choose to propagate slightly more in the
* X direction to avoid banding effects due to rounding errors.
* It would be interesting, for future versions of this software, to
* propagate the error to the second line, too. But right now I find it far
* too complex to do.
*
* +-------+-------+
* | error |FS0/FSX|
* +-------+-------+-------+
* |FS1/FSX|FS2/FSX|FS3/FSX|
* +-------+-------+-------+
*/
#define FS0 15
#define FS1 6
#define FS2 9
#define FS3 1
#define FSX 32

/* The simple Oric RGB palette, made of the 8 Neugebauer primary colours. Each
* colour is repeated 6 times so that we can point to the palette to paste
* whole blocks of 6 pixels. It’s also organised so that palette[7-x] is the
* RGB negative of palette[x], and screen command X uses palette[X & 7]. */
#define o 0x0000
#define X 0xffff
static const int palette[8][6 * 3] =
{
{ o, o, o, o, o, o, o, o, o, o, o, o, o, o, o, o, o, o },
{ X, o, o, X, o, o, X, o, o, X, o, o, X, o, o, X, o, o },
{ o, X, o, o, X, o, o, X, o, o, X, o, o, X, o, o, X, o },
{ X, X, o, X, X, o, X, X, o, X, X, o, X, X, o, X, X, o },
{ o, o, X, o, o, X, o, o, X, o, o, X, o, o, X, o, o, X },
{ X, o, X, X, o, X, X, o, X, X, o, X, X, o, X, X, o, X },
{ o, X, X, o, X, X, o, X, X, o, X, X, o, X, X, o, X, X },
{ X, X, X, X, X, X, X, X, X, X, X, X, X, X, X, X, X, X },
};

/* Set new background and foreground colours according to the given command. */
static inline void domove(uint8_t command, uint8_t *bg, uint8_t *fg)
{
if((command & 0x78) == 0x00)
*fg = command & 0x7;
else if((command & 0x78) == 0x10)
*bg = command & 0x7;
}

/* Clamp pixel value to avoid colour bleeding. Deactivated because it
* does not give satisfactory results. */
#define CLAMP 0x1000
static inline int clamp(int p)
{
#if 0
/* FIXME: doesn’t give terribly good results on eg. eatme.png */
if(p < - CLAMP) return - CLAMP;
if(p > 0xffff + CLAMP) return 0xffff + CLAMP;
#endif
return p;
}

/* Compute the perceptual error caused by replacing the input pixels "in"
* with the output pixels "out". "inerr" is the diffused error that should
* be applied to "in"’s first pixel. "outerr" will hold the diffused error
* to apply after "in"’s last pixel upon next call. The return value does
* not mean much physically; it is one part of the algorithm where you need
* to play a bit in order to get appealing results. That’s how image
* processing works, dude. */
static inline int geterror(int const *in, int const *inerr,
int const *out, int *outerr)
{
int tmperr[9 * 3];
int i, c, ret = 0;

/* 9 cells: 1 for the end of line, 8 for the errors below */
memcpy(tmperr, inerr, 3 * sizeof(int));
memset(tmperr + 3, 0, 8 * 3 * sizeof(int));

for(i = 0; i < 6; i++)
{
for(c = 0; c < 3; c++)
{
/* Experiment shows that this is important at small depths */
int a = clamp(in[i * 3 + c] + tmperr[c]);
int b = out[i * 3 + c];
tmperr[c] = (a - b) * FS0 / FSX;
tmperr[c + (i * 3 + 3)] += (a - b) * FS1 / FSX;
tmperr[c + (i * 3 + 6)] += (a - b) * FS2 / FSX;
tmperr[c + (i * 3 + 9)] += (a - b) * FS3 / FSX;
ret += (a - b) / 256 * (a - b) / 256;
}
}

for(i = 0; i < 4; i++)
{
for(c = 0; c < 3; c++)
{
/* Experiment shows that this is important at large depths */
int a = ((in[i * 3 + c] + in[i * 3 + 3 + c]
+ in[i * 3 + 6 + c]) / 3);
int b = ((out[i * 3 + c] + out[i * 3 + 3 + c]
+ out[i * 3 + 6 + c]) / 3);
ret += (a - b) / 256 * (a - b) / 256;
}
}

/* Using the diffused error as a perceptual error component is stupid,
* because that’s not what it is at all, but I found that it helped a
* bit in some cases. */
for(i = 0; i < 3; i++)
ret += tmperr[i] / 256 * tmperr[i] / 256;

memcpy(outerr, tmperr, 3 * sizeof(int));

return ret;
}

static uint8_t bestmove(int const *in, uint8_t bg, uint8_t fg,
int const *errvec, int depth, int maxerror,
int *error, int *out)
{
int voidvec[3], nvoidvec[3], bestrgb[6 * 3], tmprgb[6 * 3], tmpvec[3];
int const *voidrgb, *nvoidrgb, *vec, *rgb;
int besterror, curerror, suberror, statice, voide, nvoide;
int i, j, c;
uint8_t command, bestcommand;

/* Precompute error for the case where we change the foreground colour
* and hence only print the background colour or its negative */
voidrgb = palette[bg];
voide = geterror(in, errvec, voidrgb, voidvec);
nvoidrgb = palette[7 - bg];
nvoide = geterror(in, errvec, nvoidrgb, nvoidvec);

/* Precompute sub-error for the case where we print pixels (and hence
* don’t change the palette). It’s not the exact error because we should
* be propagating the error to the first pixel here. */
if(depth > 0)
{
int tmp[3] = { 0, 0, 0 };
bestmove(in + 6 * 3, bg, fg, tmp, depth - 1, maxerror, &statice, NULL);
}

/* Check every likely command:
* 0-7: change foreground to 0-7
* 8-15: change foreground to 0-7, print negative background
* 16-23: change background to 0-7
* 24-31: change background to 0-7, print negative background
* 32: normal stuff
* 33: inverse video stuff */
besterror = 0x7ffffff;
bestcommand = 0x10;
memcpy(bestrgb, voidrgb, 6 * 3 * sizeof(int));
for(j = 0; j < 34; j++)
{
static uint8_t const lookup[] =
{
0x00, 0x04, 0x01, 0x05, 0x02, 0x06, 0x03, 0x07,
0x80, 0x84, 0x81, 0x85, 0x82, 0x86, 0x83, 0x87,
0x10, 0x14, 0x11, 0x15, 0x12, 0x16, 0x13, 0x17,
0x90, 0x94, 0x91, 0x95, 0x92, 0x96, 0x93, 0x97,
0x40, 0xc0
};

uint8_t newbg = bg, newfg = fg;

command = lookup[j];
domove(command, &newbg, &newfg);

/* Keeping bg and fg is useless, because we could use standard
* pixel printing instead */
if((command & 0x40) == 0x00 && newbg == bg && newfg == fg)
continue;

/* I *think* having newfg == newbg is useless, too, but I don’t
* want to miss some corner case where swapping bg and fg may be
* interesting, so we continue anyway. */

#if 0
/* Bit 6 off and bit 5 on seems illegal */
if((command & 0x60) == 0x20)
continue;

/* Bits 6 and 5 off and bit 3 on seems illegal */
if((command & 0x68) == 0x08)
continue;
#endif

if((command & 0xf8) == 0x00)
{
curerror = voide;
rgb = voidrgb;
vec = voidvec;
}
else if((command & 0xf8) == 0x80)
{
curerror = nvoide;
rgb = nvoidrgb;
vec = nvoidvec;
}
else if((command & 0xf8) == 0x10)
{
rgb = palette[newbg];
curerror = geterror(in, errvec, rgb, tmpvec);
vec = tmpvec;
}
else if((command & 0xf8) == 0x90)
{
rgb = palette[7 - newbg];
curerror = geterror(in, errvec, rgb, tmpvec);
vec = tmpvec;
}
else
{
int const *bgcolor, *fgcolor;

if((command & 0x80) == 0x00)
{
bgcolor = palette[bg]; fgcolor = palette[fg];
}
else
{
bgcolor = palette[7 - bg]; fgcolor = palette[7 - fg];
}

memcpy(tmpvec, errvec, 3 * sizeof(int));
curerror = 0;

for(i = 0; i < 6; i++)
{
int vec1[3], vec2[3];
int smalle1 = 0, smalle2 = 0;

memcpy(vec1, tmpvec, 3 * sizeof(int));
memcpy(vec2, tmpvec, 3 * sizeof(int));
for(c = 0; c < 3; c++)
{
int delta1, delta2;
delta1 = clamp(in[i * 3 + c] + tmpvec[c]) - bgcolor[c];
vec1[c] = delta1 * FS0 / FSX;
smalle1 += delta1 / 256 * delta1;
delta2 = clamp(in[i * 3 + c] + tmpvec[c]) - fgcolor[c];
vec2[c] = delta2 * FS0 / FSX;
smalle2 += delta2 / 256 * delta2;
}

if(smalle1 < smalle2)
{
memcpy(tmpvec, vec1, 3 * sizeof(int));
memcpy(tmprgb + i * 3, bgcolor, 3 * sizeof(int));
}
else
{
memcpy(tmpvec, vec2, 3 * sizeof(int));
memcpy(tmprgb + i * 3, fgcolor, 3 * sizeof(int));
command |= (1 << (5 - i));
}
}

/* Recompute full error */
curerror += geterror(in, errvec, tmprgb, tmpvec);

rgb = tmprgb;
vec = tmpvec;
}

if(curerror > besterror)
continue;

/* Try to avoid bad decisions now that will have a high cost
* later in the line by making the next error more important than
* the current error. */
curerror = curerror * 3 / 4;

if(depth == 0)
suberror = 0; /* It’s the end of the tree */
else if((command & 0x68) == 0x00)
{
bestmove(in + 6 * 3, newbg, newfg, vec, depth - 1,
besterror - curerror, &suberror, NULL);

#if 0
/* Slight penalty for colour changes; they're hard to revert. The
* value of 2 was determined empirically. 1.5 is not enough and
* 3 is too much. */
if(newbg != bg)
suberror = suberror * 10 / 8;
else if(newfg != fg)
suberror = suberror * 9 / 8;
#endif
}
else
suberror = statice;

if(curerror + suberror < besterror)
{
besterror = curerror + suberror;
bestcommand = command;
memcpy(bestrgb, rgb, 6 * 3 * sizeof(int));
}
}

*error = besterror;
if(out)
memcpy(out, bestrgb, 6 * 3 * sizeof(int));

return bestcommand;
}

static void write_screen(float const *data, uint8_t *screen)
{
int src[(WIDTH + 1) * (HEIGHT + 1) * 3];
int dst[(WIDTH + 1) * (HEIGHT + 1) * 3];
int *srcl, *dstl;
int stride, x, y, depth, c;

stride = (WIDTH + 1) * 3;

memset(src, 0, sizeof(src));
memset(dst, 0, sizeof(dst));

/* Import pixels into our custom format */
for(y = 0; y < HEIGHT; y++)
for(x = 0; x < WIDTH; x++)
for(c = 0; c < 3; c++)
src[y * stride + x * 3 + c] =
0xffff * data[(y * WIDTH + x) * 4 + (2 - c)];

/* Let the fun begin */
for(y = 0; y < HEIGHT; y++)
{
uint8_t bg = 0, fg = 7;

//fprintf(stderr, "\rProcessing... %i%%", (y * 100 + 99) / HEIGHT);

for(x = 0; x < WIDTH; x += 6)
{
int errvec[3] = { 0, 0, 0 };
int dummy, i;
uint8_t command;

depth = (x + DEPTH < WIDTH) ? DEPTH : (WIDTH - x) / 6 - 1;
srcl = src + y * stride + x * 3;
dstl = dst + y * stride + x * 3;

/* Recursively compute and apply best command */
command = bestmove(srcl, bg, fg, errvec, depth, 0x7fffff,
&dummy, dstl);
/* Propagate error */
for(c = 0; c < 3; c++)
{
for(i = 0; i < 6; i++)
{
int error = srcl[i * 3 + c] - dstl[i * 3 + c];
srcl[i * 3 + c + 3] =
clamp(srcl[i * 3 + c + 3] + error * FS0 / FSX);
srcl[i * 3 + c + stride - 3] += error * FS1 / FSX;
srcl[i * 3 + c + stride] += error * FS2 / FSX;
srcl[i * 3 + c + stride + 3] += error * FS3 / FSX;
}

for(i = -1; i < 7; i++)
srcl[i * 3 + c + stride] = clamp(srcl[i * 3 + c + stride]);
}
/* Iterate */
domove(command, &bg, &fg);
/* Write byte to file */
screen[y * (WIDTH / 6) + (x / 6)] = command;
}
}

//fprintf(stderr, " done.\n");
}


Пиши Преглед
Зареждане…
Отказ
Запис